Dropdown Catalog

PTO wood shredder for ARPAL tractor MK-170TR

Code: MK-170TR

+16 Photo

+18 Photo

	Бренд	ARPAL
Block length	1650 mm
Block width	1150 mm
Block height	2350 mm

Show all characteristics

10990 € (with VAT)

Compare

Add

Specifications
Description
Videos 1
Reviews 0

Specifications


Pin diameter for 3-point hinge	28 mm
Tractor power	50 hp
Warranty period	3 years
Mass	610 kg
Block length	1650 mm
Block width	1150 mm
Block height	2350 mm
Estimated productivity	12 m³/h
Max diameter of sheet breeds	130 mm
Max diameter of soft wood	170 mm
Length blocks	5-60 mm
Knives	4 ks
Engine speed	540-1000 ot/min
Surface treatment	powder coating

Description

MK-170TR wood chipper

Wood shredder MK-170TR disk type is designed for processing and disposal by shredding branches and other wood waste. The wood chipper turns the raw material into technological chips. Up to 90% of the resulting chips will have a size of 5 ... 60 mm, 10% - a free size, when crushing thin branches, an increase or decrease in the fraction is possible. The size of the chips is not regulated and mainly depends on the type of source material. The MK-170TR wood chipper is capable of cutting branches up to 17 cm in diameter, depending on the moisture content and wood species. Ready chips can be used for heating in solid fuel and pyrolysis boilers, fireplaces, stoves and other heating appliances.

Wood chips can also be used as plant mulch or fertilizer. With further processing, wood chips can be used to produce fuel pellets or granules.

The working body MK-170TR is a disc with 4 knives on it, on the opposite side of the disc there are blades that create the necessary air pressure to supply chips to the unloading funnel. The knives are made of steel 55VTsrV8, which significantly extends the service life of the chopper knives. Without fail, the knives undergo a heat treatment process on a modern HF-INDUCTION HEATING unit. The productivity of the chipper MK-170TR is 12 cubic meters of finished wood chips per hour. Productivity directly depends on the quality of preparation of raw materials and the number of personnel involved in the work.

The MK-170TR wood chipper is driven by the tractor PTO and mounted on a standard three-point hitch. The minimum required tractor power to work with a chopper is 50 hp. To connect the tractor to the chopper, we recommend using a class T5 cardan shaft with a friction clutch that protects the chopper and tractor from overload. The wood chipper has a discharge funnel that allows you to change the direction of the chip flow in two planes and rotates 360˚. By lifting the chopper on the fluid coupling, you can increase the loading height. The loading hopper is equipped with a transparent PVC curtain to protect the operator from chips during operation.

Schematic wood chipper

Videos

Reviews

Cross-selling